Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
to come to room temperature before completing assembly.
Remove contents from box, making sure you have all parts
described here:
Seat Frame with left and right drop arms
■
assembled (1)
Backrest Assembly (1)
■
Splash Guard (1)
■
Toilet Seat (1)
■
1.
Place the arm assembly (L) and arm assembly (R ) into
seat frame by pushing in pin and lifting arm up. (Figure 1)
2.
Place backrest assembly between the arm assemblies.
3.
Snap clips on toilet seat into place on the seat frame.
Lower the splash guard bucket, bucket and bucket lid
into seat frame assembly. (Figure 2)
4. Lock wheels before use by pushing down brake tab on
each wheel. Pull up on tab to release brakes to roll the
commode when needed. (Figure 3)
Adjusting leg height
Before using the commode, make sure all legs are set to the
same preferred height.
1.
To adjust leg height, depress pushbutton and slide each
leg to desired height by aligning with proper holes and
letting the pushbutton snap into the correct hole to lock
leg in place. (Figure 4)
2.
Make sure legs are locked into place by pushing down and
pulling up on each leg commode.
Maintenance
Periodic visual inspection of this commode is recommended to ensure that all parts and
hardware are secure, that components are in good working order and not worn, torn,
frayed, or loose, and that there are no obstructions or impediments to normal, safe oper-
ation. If any part or mechanism appears to be unsafe or damaged, do not use the product.
If you experience problems, please contact Medline at 1-800-MEDLINE | 1-800-268-2848.
Cleaning
1. Clean with regular household cleaning products. Use a non-abrasive cleaner with
warm water. Wipe dry after cleaning.
2. DO NOT use abrasive powders, cleaners or scouring pads.
Toilet Lid (1)
■
Bucket Lid (1)
■
Bucket (1)
■
1-800-MEDLINE (633-5463) | medline.com 3
Figure 1
Figure 2
Figure 3
Figure 4
1
2
3
4
Publicidad
Tabla de contenido
