Conventions In This Manual; General Information On The Installation Manual; Target Group; Symbols And Formats - Waeco CA-800-DAF Instrucciones De Instalación

CA-800-Install.book Seite 24 Mittwoch, 4. Juli 2007 3:05 15

Conventions in this manual

2 Conventions in this manual
2.1

General information on the installation manual

This installation manual contains the essential information and instructions
for installing the roof air conditioner. The information here is intended for
the company installing the roof air conditioner.
The following instructions are intended to help you use the installation
manual properly:
The installation manual is part of the scope of delivery and should be
stored carefully.
The installation manual provides you with important information on the
installation of the device and can also be used as reference material in
the event of repairs.
The manufacturer (WAECO) assumes no liability for non-observance of
these installation instructions. Any claims are excluded in this case.
The operating manual for the CoolAir CA-800 can be found in the scope of
delivery for the roof air conditioner.
2.2

Target group

The installation and configuration information in this manual is intended for
qualified personnel at installation workshops who are familiar with the
guidelines and safety precautions to be applied during the installation of
vehicle accessory parts.
2.3

Symbols and formats

You will come across certain symbols and formats in this documentation.
This is what they mean:
Format
Bold
➤
✓
24
All manuals and user guides at all-guides.com
Meaning
Important information in the
text which may not be misun-
derstood
Instruction text
Results of an action
Example
Set the switch (3) to the
COOLING symbol.
➤
Lay the roof air conditioner
on a work surface with the
housing facing downwards.
✓ The device is now ready for
operation.
CoolAir