Copy Function; Firmware Update - TrekStor MovieStation pocket c.uc Manual De Instrucciones

8) Copy function

In order to be able to use the copy function of your MovieStation, the MovieStation must be formatted with the file
i
system FAT32.
Direct copying of the entire memory card content
To copy the complete content of the memory card, insert the memory card into the corresponding memory card slot as
described in these operating instructions. Keep the
to start the copy procedure.
The copied files are saved in the "trANSFer" folder in the folder navigation.
i
Copying of individual files
a) In the folder navigation, select the file to be copied.
b) Press the "COPY" button on your remote control. The copy mode is started and the available storage media appear in
the right side of your television screen for selection.
c) By pressing the button, switch to the right side of the screen and select the target folder for the file to be copied.
F
By pressing the button, you can return to the left side of the screen.
E
d) To start the copy procedure, press the "COPY" button to copy the file into the selected target folder.
Caution: If you cancel the started copy procedure by pressing the
a
able to be executed.
e) To leave the copy mode, press the

9) Firmware update

The firmware is the program responsible for the control of your MovieStation. A firmware update serves to transfer
firmware upgrades to your MovieStation. If you should encounter any problems with your MovieStation, please
make sure that you have installed the latest firmware version.
a) Download the firmware (*.zip file) from the TrekStor website (www.trekstor.de) and unzip it in the folder of your
choice.
b) For the firmware update, please observe the update instructions supplied with the firmware.
c) Connect the MovieStation to your computer. Insert the provided power supply into an electrical outlet, and
connect the cable to the "dC iN" connection of the MovieStation.
d) Use the provided USB connection cable to connect the MovieStation to a USB port on your computer.
e) Turn on the MovieStation by briefly pressing the on/off switch
f ) Copy the unzipped software (*.rom file) to the main directory of the MovieStation.
EN
38
button on your MovieStation pressed for approximately 1 second
§
button.
M
button, the incompletely copied file might not be
μ
.
/