All manuals and user guides at all-guides.com
NOTE: If QIS does not launch automatically, follow these steps to manually launch
QIS:
Key in http://192.168.1.1 or http://asus.router.com and run the Quick Internet
•
Setup (QIS) Wizard again.
•
Disable the proxy settings, dial-up connection, and set your TCP/IP settings to
automatically obtain an IP address. For more details, please refer to the ASUS
Support site.
2. Your xDSL modem router automatically configures the DSL Annex mode, Internet
connection type, and VPI/VCI value and encapsulation modes. Key in the Internet
account information that you obtained from your Internet Service Provider (ISP).
IMPORTANT! Obtain the necessary information from your ISP to configure the Inter-
net connection.
NOTES:
•
The auto-detection of your ISP connection type takes place when you configure
your xDSL modem router for the first time or when your device is reset to its
default settings.
•
By default, the QIS Wizard is for DSL setup. If you want to configure DSL-AC52U as
a wireless router, refer to the section Internet Connection in the user manual.
u11065_dsl-ac52u_qsg.indb 5
5
2015-11-26 10:12:49