Component List; Noise Information - Worx WX713 Manual Original

workpiece. Let the wheel reach full speed
and carefully re-enter the cut. The wheel
may bind, walk up or kickback if the power tool is
restarted in the workpiece.
e) Support panels or any oversized workpiece
to minimize the risk of wheel pinching and
kickback. Large workpieces tend to sag under
their own weight. Supports must be placed under
the workpiece near the line of cut and near the
edge of the workpiece on both sides of the wheel.
f) Use extra caution when making a "pocket
cut" into existing walls or other blind areas.
The protruding wheel may cut gas or water
pipes, electrical wiring or objects that can cause
kickback.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Double insulation
Warning
8
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
Before any work on the machine itself,
pull the mains plug from the socket
outlet.
Wear protective gloves
Angle Grinder
All manuals and user guides at all-guides.com

COMPONENT LIST

1. ON / OFF SWITCH
2. HAND GRIP AREA
3. AUXILIARY HANDLE
4. SPINDLE LOCK BUTTON
5. WHEEL GUARD FOR GRINDING
6. OUTER FLANGE
7. INNER FLANGE
8. SPINDLE
9. SPANNER
10. METAL GRINDING DISC
Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
WX713 (700-749 - designation of
Type
machinery, representative of Angle Grinder)
Voltage
Power input
Rated speed
Protection class
Spindle thread
Disc size
Disc bore
Machine weight
Thickness of grinding wheels

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K = 3.0 dB (A)
PA WA
Wear ear protection
230-240V~50Hz
800W
12000/min
/II
M14
125 mm
22.2 mm
1.5 kg
6 mm
L =89.2 dB(A)
pA
L =100.2 dB(A)
wA
EN