Troubleshooting - Angelcare AC-WSP Manual De Usuario

NAVIGATING MOVEMENT REPORTS:
2
3
17
4
MONITORING IMPORTANT BUTTONS AND ICONS
Sensor Pad Movement Levels: The red bar indicates the amount of movement from your Sensor Pad.
Low Movement
0-20 movements

TROUBLESHOOTING

LOSS OF CONNECTIVITY
• If your Sensor Pad becomes un-paired from your Parent Unit refer to STEP 2.1.
FALSE ALARMS
• Turn OFF the Camera.
• Make sure there is no bedding between the mattress and the Sensor Pad.
• If the cot has a spring or slat base, place a hardboard between the cot base and the Sensor Pad
measuring at least 33 cm x 33 cm x 6 mm in thick.
• Make sure the Sensor Pad is positioned as described under the setup requirements. Sensitivity
may need to be adjusted.
ALARM WILL NOT SOUND
• Avoid contact with the cot when the monitor is ON.
• Place cot near a solid supporting wall to avoid Sensor Pad from detecting movement from outside the cot.
• You may need to decrease the sensitivity.
10
All manuals and user guides at all-guides.com
5
18°C
6
18°C
3
18°C
20 20 18 23 24 24 20 18
Medium Movement
20-30 movements
5) Tap the Monitoring toggle button to
switch the monitoring function
ON/OFF (the toggle button will turn
blue when ON).
6) Tap the Save icon at the bottom of the
screen to confirm.
1) Tap the screen anywhere to bring up
the menu.
2) Tap the Monitoring icon
3) In the movement reports, tap the
arrows to navigate hour by hour or
day by day.
4) Tap the Arrow Back
the Main Menu.
High Movement
Over 30 movements
.
to go back to