Technical Data; Ec Declaration Of Conformity; Safety Instructions; English - DeWalt DC509 Manual Del Usuario

All manuals and user guides at all-guides.com
FLASHLIGHT DC509/DC519
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical data

Voltage V
DC
Weight (without battery pack) kg
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may result
in property damage.
Denotes risk of electric shock.
EC-Declaration of conformity
DC509/DC519
D WALT declares that these power tools have been
E
designed in compliance with: 89/336/EEC,
2000/95/EC, EN60598, EN55014-1, EN55014-2.
DE9000
D WALT declares that this charger has been
E
designed in compliance with:
89/336/EEC, 2002/95/EC, 2006/95/EC,
EN60335-1, EN60335-2-29, EN60336,
EN55014-1, EN55014-2, EN61000-3-2,
EN61000-3-3.
DC509 DC519
For more information, please contact D
36 28
at the address below, or refer to the back of the
0.52 0.52
manual.
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 11
E
D-65510, Idstein, Germany
4/2007

Safety instructions

When using power tools, always observe the
safety regulations applicable in your country
to reduce the risk of fire, electric shock and
personal injury.
Read all of this manual carefully before
operating the tool.
Save this manual for future reference.
General
1 Keep work area clean
Cluttered areas and benches can cause
accidents.
2 Consider work area environment
Keep the work area well lit (250 - 300 Lux).
Do not use the tool where there is a risk of
causing fire or explosion, e.g. in the presence of
flammable liquids and gases.
3 Keep children away
Do not allow children, visitors or animals to
come near the work area or to touch the tool or
the mains cable.
E N G L I S H
WALT
E
13