Technical Data; Defi Nitions: Safety Guidelines; Important Safety Rules - DeWalt DC019 Traducido De Las Instrucciones Originales

HEAVY-DUTY CORDLESS/CORDED WORKLIGHT
DC019/DC020
Congratulations!
You have chosen a D WALT product. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional users.

Technical Data

DC019
Voltage V 230
AC
(U.K. & Ireland only) V –
AC
Max. Rated Current A 3.2
(U.K. & Ireland only) A –
Battery V 12–18
DC
NiCd/
NiMH/
Li-Ion
Fluorescent Lamp V 230
AC
W 38
Weight (unit only) kg 2.5
Outlets
Europe 230 V tools 15 Amperes
AC
U.K. & Ireland 230 V tools 12 Amperes
AC
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.

Important Safety Rules

1. WARNING! When using the DC019 and
DC020 DC020LX
DC020 worklights, basic precautions should
230 –
always be followed, including the following:
230 115
a. Read all the instructions before using the
15 –
DC019 and DC020 worklights.
15 3.2
b. To reduce the risk of injury, close supervision
12–18 12–18
is necessary when a worklight is used near
NiCd/ NiCd/
children.
NiMH/ NiMH/
c. Do not contact moving parts.
Li-Ion Li-Ion
d. Only use attachments recommended or sold
230 115
by the manufacturer.
38 38
e. Do not use outdoors.
2.7 2.5
f. To disconnect, turn all controls to the off
("O") position, then remove plug from outlet.
g. Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
–
– h. Unplug from outlet when not in use and
before servicing or cleaning.
i. Do not operate any worklight with a
damaged cord or plug, or after the worklight
malfunctions or is dropped or damaged in
any manner. Return worklight to the nearest
authorized service facility for examination,
repair, or electrical or mechanical adjustment.
j. To reduce the risk of electrical shock, do not
put worklight in water or other liquid. Do not
place or store worklight where it can fall or
be pulled into a tub or sink.
k. Use only the charger supplied by the
manufacturer.
l. Always unplug before replacing the bulb.
Replace bulb with same type rated 38 Watts.
m. Connect to a properly grounded outlet. Refer
to Grounding Instructions.
Denotes risk of electric shock.
Denotes risk of fire.
EN GL IS H
23