Safety Instructions For Batteries; Initial Operation; Connecting To Power - Silvercrest SKR D1 C3 Guía Rápida

Radio digital de cocina dab+
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
Safety instructions for
batteries
m
DANGER TO LIFE! Keep batteries out of
reach of children . If accidentally swallowed
seek immediate medical attention .
Swallowing may lead to burns, perforation of
soft tissue, and death . Severe burns can occur
within 2 hours of ingestion .
DANGER OF EXPLOSION!
 
Never recharge non-rechargeable
batteries . Do not short-circuit
batteries and open them . Overheating, fire or
bursting can be the result .
Never throw batteries into fire or water .
 
Do not exert mechanical loads to batteries .
 
Risk of leakage of batteries
Avoid extreme environmental conditions and
 
temperatures, which could affect batteries, e .g .
radiators / direct sunlight .
If batteries have leaked, avoid contact with
 
skin, eyes and mucous membranes with the
chemicals! Flush immediately the affected
areas with fresh water and seek medical
attention!
WEAR PROTECTIVE GLOVES!
 
Leaked or damaged batteries can
cause burns on contact with the skin .
Wear suitable protective gloves at all times if
such an event occurs .
In the event of a leakage of batteries,
 
immediately remove them from the product to
prevent damage .
Remove batteries if the product will not be used
 
for a longer period .
20 GB/IE
Risk of damage of the product
Only use the specified type of battery!
 
Insert batteries according to polarity marks (+)
 
and (–) on the battery and the product .
Use a dry lint-free cloth or cotton swab to
 
clean the contacts on the battery before
inserting!
Remove exhausted batteries from the product
 
immediately .
˜ Initial operation
˜ Connecting to power
11
20
Connect the coaxial power connector of the
 
power adaptor
20 ]
[
port
.
11 ]
[
Plug the power adaptor into a properly
installed mains socket .
The product first displays a fictitious date and
time 00:00 .
A DAB station search is started in the
background .
The date and time are set automatically .
After this installation routine, the product is in
standby mode .
10
12
to the power adaptor

Publicidad

Tabla de contenido
loading

Tabla de contenido