Introduction - Cameo Q-SPOT 40i Manual De Usuario

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for
a cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
Caution! Intense LED light source! Risk of eye damage. Do not look into the light source.
CAUTION! IMPORTANT INFORMATION ABOUT LIGHTING PRODUCTS!
1. The product has been developed for professional use in the field of event technology and is not suitable as household lighting.
2. Do not stare, even temporarily, directly into the light beam.
3. Do not look at the beam directly with optical instruments such as magnifiers.
4. Stroboscope effects may cause epileptic seizures in sensitive people! People with epilepsy should definitely avoid places where
strobes are used.

INTRODUCTION

OUTDOOR Q SPOT 40 RGBA
CLQS40IB (black)
CLQS40IW (white)
CONTROL FUNCTIONS
2-channel, 3-channel, 4-channel, 9-channel DMX control
Master/slave mode
Stand-alone function
Control via IR remote control (remote control optional)
PROPERTIES
Compact outdoor spot with a 40 W quad-LED (RGBA). 4 DMX modes. DMX-512 control. Master/slave mode. Stand-alone functions. Stand
and/or mounting bracket, and earth anchor, included. 2 diffusers included. Operating voltage: 100–240 V AC / 50–60 Hz. Power consumption
49 W. IP65 protection rating.
The spotlights comply with the RDM standard (Remote Device Management). Remote device management allows the user to view
status and configuration of RDM terminals via an RDM-capable controller.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable
parts inside. Maintenance and repairs should be exclusively carried out by qualified service
personnel.