Kohler K-142 Manual De Instrucciones página 6

Install the adapter on the transfer
S
valve using thread sealant. Tighten the
nut until the adapter is secure.
Install the pipe fitting on the transfer
S
valve using thread sealant.
Connect the plastic flexible hose to the
S
pipe fitting using thread sealant.
Slide the sealing washer (tapered side
S
up) onto the transfer valve.
From the underside of the bidet, insert
S
the transfer valve up through the hole
so the pipe fitting and plastic flexible
hose face to the right side of the bidet
(as viewed from the front of the bidet).
Install the second sealing washer
S
(tapered side down), flat washer, and
plastic nut onto the transfer valve.
Securely hand-tighten the plastic nut.
S
Rotate the valve stem fully
S
counterclockwise (as viewed from the
front of the bidet).
Install the spline insert on the valve
S
stem.
Thread the escutcheon onto the
S
plastic nut.
Position the handle with the pointer
S
toward the front of the bidet, and press
the handle onto the spline insert.
1010448-2-D
Sealing
Washer
Transfer Valve
Apply Thread
Sealant
6
Apply Thread
Sealant
Plastic
Flexible
Hose
Pipe Fitting
Adapter
Plastic Nut
Flat Washer
Sealing
Washer
Transfer
Valve
Handle
Escutcheon
Spline Insert
Valve Stem
Plastic Nut
Kohler Co.