Height Adjustment; Cleaning And Maintenance - DURABLE 5087 Traducción Del Manual Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43

Height adjustment

▶ siehe Abbildung 16
– Loosen the adjusting screw (12).
– Slide the arm bracket (4) to the desired position on the table
column (5).
– Fix the monitor arm again using the adjusting screw (12).
Moving the brackets
▶ siehe Abbildung 17
– Loosen the adjusting screws (13).
– Place the monitor and the tablet in the desired position.
– Fix the position of brackets using the respective adjusting screw
(13).
Exchanging monitor
▶ siehe Abbildung 18
– Remove the cable clamps and monitor cable.
– Lift the monitor slightly to relieve the clamps.
– Press the clamps (16) of the VESA plate (1) together as shown
and lift the monitor out of the bracket (15).
– Release the VESA plate from the monitor and attach these as
described above to the new monitor.

Cleaning and maintenance

WARNING!
Risk of product damage!
Do not use any abrasive or sharp objects or aggressive
cleaning agents.
Do not use any solvents.
– In order to prevent the mobility from decreasing due to dust de-
posits, regular dust removal on the monitor bracket is recom-
mended.
– Wipe the product with a dry or slightly damp microfibre cloth.
EN
English
31

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

5088

Tabla de contenido