Klarstein Beersafe 10033347 Manual Del Usuario página 12

EN
12
All manuals and user guides at all-guides.com
MECHANICAL THERMOSTAT
1 Thermostat
2 Light switch
3 Light
To set the temperature
To start the refrigerator, turn the temperature control knob to the appropriate position.
The refrigerator temperature is controlled by setting the thermostat located at the top of
the refrigerator.
• Setting 0 (OFF) = the refrigerator is off.
• Setting 1 (MIN) = lowest setting (warmest indoor temperature)
• Setting 7 (MAX) = highest setting (coldest indoor temperature)
Defrost device manually
Despite automatic defrosting, a layer of ice may form in the appliance after a certain
period of time. If the layer is thicker than 1 cm, you must defrost the appliance manually.
Take everything out of the fridge, set the regulator to OFF and leave the fridge door
open. Once the ice has melted, dry the interior with a soft cloth and turn the thermostat
back on.
Note: When the appliance is switched on again, it may take up to 12 hours to restore
the desired temperature inside the appliance.