Reversing Dryer Door Swing - Maytag MLE20PD Instrucciones De Instalación

REVERSING DRYER DOOR SWING

NOTE: Dryer only. Washer door is not reversible.
Remove the Door Assembly
1. Place a towel or soft cloth on top of dryer or work space to avoid
scratching of the surface.
2. Remove 3 of the 4 screws that hold the door hinge on the front
panel of the dryer. Partially loosen the remaining screw with
keyhole opening and lift the door off the screw.
3. Lay the door assembly on a previously prepared flat surface
with the inside (inner door assembly) facing up, and remove 6
phillips-head screws to release outer door assembly from inner
door assembly.
NOTE: It is important that you remove only 6 indicated screws.
24
All manuals and user guides at all-guides.com
4. Lift the inner door assembly off outer door assembly.
5. Rotate outer door 180°.
Reverse Hinge
1. Use a small flat-blade screwdriver to remove 2 plug strips from
2. Remove the 4 screws that attach to inner door hinge.
the inner door. Slide the head of the screwdriver under the
plugs, without scratching inner door surface, and lift up strip.