Maytag MLE20PD Instrucciones De Instalación página 32

Lavadora/secadora comerciales apiladas a gas o electricas
Ocultar thumbs Ver también para MLE20PD:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ELECTRONIC CONTROL SETUP INSTRUCTIONS
Code
Explanation
MONEY COUNTER OPTION
1. 00
This option is either NOT SELECTED "00" or
SELECTED "0C. "
1. 00
Not Selected "00. "
1. 0C
Selected "0C. "
• Press the lower-right (QUICK CYCLE) button 3
consecutive times to select "0C" and 3 consecutive
times to deselect (Not Selected "00"). Counter
resets by going from "OFF" to "ON. "
1. C0
Selected "C0" and not able to be deselected.
• To select "C0" and not able to be deselected,
first select "0C, " then within 2 seconds, press
the lower-middle (DELICATES AND KNITS) button
twice, the lower-left (PERM. PRESS) button once,
and exit set-up mode.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
2. 00
SPECIAL PRICING OPTIONS
This option is either NOT SELECTED "00" or
SELECTED "SP. "
2. 00
Not Selected "00, " and next available code will be
A.00
2. SP
Selected "SP. "
• Press the lower-right (QUICK CYCLE) button once
to change this selection.
If SPECIAL PRICING OPTION is selected, there is access to
codes "3.XX" through "9.XX. "
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
If money counter (1.0C or 1.C0) is selected, the following is
true:
3 00
Currency amount
in HUNDREDS
4 00
Currency amount
in ONES
5 00
Currency amount
in HUNDREDTHS
32
All manuals and user guides at all-guides.com
OPTIONS 3.XX – 9.XX TO USE IF SPECIAL PRICING
IS SELECTED
Code
3. 07
3. 07
3. 00
3.06
3.06
3.00
4.05
4.05
4.45
3 01 = 100.00
4 68 = 68.00
5. 00
5. 00
5 75 = 00.75
TOTAL = 168.75
6. 00
6. 00
Explanation
SPECIAL CYCLE PRICE (WASHER)
Represents the number of coins (coin 1) to start the
washer; may adjust from 0–39. (See VALUE OF
COIN 1.)
• Advance from 0–39 by pressing the lower-left
(PERM. PRESS) button. Factory default of 7 coins
= 1.75
PN MODELS ONLY: Factory default of 0 coins.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
SPECIAL CYCLE PRICE (DRYER)
Represents the number of coins (coin 1)
to start the dryer; may adjust from 0–39.
(See VALUE OF COIN 1).
• Advance from 0–39 by pressing the upper-left
(WHITES & COLORS) button. Factory default
of 6 coins = 1.50.
PN MODELS: Factory default of 0 coins.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
SPECIAL DRY TIME (DRYER)
PD MODELS: Represents the number of minutes per
coin (coin 1).
• Factory default of 5 minutes per coin.
Example: 6 coins x 5 minutes = 30 minutes.
• By pressing the upper-left (WHITES & COLORS)
button, the value can be adjusted from 1–99
minutes.
PN MODELS: Represents the fixed cycle time
in minutes. Example: "4 45" = 45 minutes.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
TIME-OF-DAY CLOCK, MINUTES
This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the lower-left
(PERM. PRESS) button.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time or 24 hr. clock.
This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the lower-left
(PERM. PRESS) button.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mlg20pdMle20pn

Tabla de contenido