Overview Of The Components - AEG MRC 4136 Instrucciones De Servicio

Overview of the Components

1 Alarm off-switch (AL OFF)
2 Function switch (ON/OFF/AUTO)
3 Hour function key (HOUR)
4 Set minutes (MIN)
5 Function key (SNOOZE)
6 Loudspeaker
7 Function key for delayed switch-off (SLEEP)
8 Time setting function key (TIME)
9 Band selection switch (AM/FM)
10 Regulator (TUNING)
11 Function key setting alarm-time (ALARM)
12 Battery compartment
13 LED display
14 LED for activated alarm function (ALM)
15 Volume control (BUZZ VOLUME)
Putting into function
• Select a proper place for the device such as a dry, and even non slip area where you
can easily operate the device.
• If still in place, remove the protection foil from the display.
Inserting the power reserve battery
(not supplied)
If there is a power cut or the mains plug has been removed from the power socket, the
settings will be retained if the power reserve batteries are inserted.
1. Open the battery compartment on the underside.
2. Connect a 9 V, E compound battery to the supply connection. Please ensure the cor-
rect polarity.
3. Close the battery compartment again.
4. If the device is not used for a prolonged period of time, please take the batteries out in
order to prevent leakage of battery acid.
CAUTION:
Batteries are not to be disposed of together with domestic wastes. Dispose of the used
batteries at the relevant collection bin or at your dealer' s .
English
43