Troubleshooting; Corrective Action - Harbor Breeze ARMITAGE CC52WW5C Manual Del Usuario

Ocultar thumbs Ver también para ARMITAGE CC52WW5C:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

WARNING: Before beginning work, shut off the power supply to avoid electrical shock.
PROBLEM
Fan does not move.
Noisy operation.
Excessive wobbling.
Fan operates but light
fails.
NOTE: A small amount of "wobble" is normal and should not be considered a defect.
All manuals and user guides at all-guides.com
POSSIBLE CAUSE
1. Reverse switch not engaged.
2. Power is off or fuse is blown.
3. Faulty wire connection.
1. Blades are loose.
2. Cracked blade.
3. Full range dimmer switch.
4. Fan is new.
5. Motor housing is loose.
1. Blades are loose.
2. Blade arms incorrectly
attached.
3. Unbalanced blades.
4. Fan not securely mounted.
1. Bulb not installed correctly.
2. Wires in outlet box not wired
properly.
3. Wall switch to fan is off.
15

CORRECTIVE ACTION

1. Push switch firmly either up or
down.
2. Turn power on or check fuse.
3. Turn power off. Loosen motor
housing and check all
connections.
1.
Tighten all blade screws.
2. Replace blade.
3. Replace with an approved
speed control device.
4. Allow fan a "break in" period of a
few days, especially when
running the fan at Medium and
High speeds.
5. Turn power off. Carefully loosen
motor housing and verify
that mounting bracket is
secure according to instructions
on page 7.
1.
Tighten all blade screws.
2. Re-install blade arms.
3.
Switch one blade with a
blade from the opposite
side.
4. Turn power off. Carefully loosen
motor housing and verify
that motor assembly is
secure according to instructions
on page 10.
1. Re-install bulb.
2. Check wires in outlet box and, if
necessary, re-wire according to
instructions on pages 8 and 9.
3. Make sure that wall switch to fan
is on.
Lowes.com/harborbreeze

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

0020776

Tabla de contenido