Fimar EASY LINE MF/914 Manual De Uso Y Mantenimiento página 59

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MF/914 - MC/2425 MICROWAVE OVEN
Setting of "Convection" mode (with pre-heating) MC/2452
1. Press button (D) to select the "Convection" mode.
2. Press the same button (D) repeatedly to select the desired temperature level (from 150
°C to 240 °C).
3. Press button (H) to start pre-heating.
4. When the set temperature is achieved, the value on display (A) flashes and the warning
signal is activated.
Open the door and insert the product.
5. Turn selector (L) to set the cooking time, shown on display (A).
6. Press button (H) to start the selected processing cycle.
Setting of "Convection" mode (without pre-heating) MC/2452
1. Press button (D) to select the "Convection" mode.
2. Press the same button (D) repeatedly to select the desired temperature level (from 150
°C to 240 °C).
3. Purn selector (L) to set the cooking time, shown on display (A).
4. Press button (H) to start the selected processing cycle.
Cook programming in several phases
The appliance can be set to automatically run up to 2 different operating modes.
The following is a description of an example of cooking programming in different phases
(defrost the food product for 80 minutes, then cook with microwave at 80% power for 7
min.):
1. Press button (E) to select defrost mode, the display (A) will show text "dEF2".
2. Turn selector (L) to set the defrost time (5:00) shown on the display (A).
3. Press button (B) to set the power level to 80 % (P80) shown on the display (A).
4. Press button (H) to confirm the values set and turn selector (L) to set the cooking time
(7:00), shown on the display (A).
5. Press button (H) to confirm selection and start the cooking cycle.
- 15 -
EN
English language