Fimar EASY LINE MF/914 Manual De Uso Y Mantenimiento página 80

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MC/1800 MICROWAVE OVEN
example:: Carry out the following operations if you want to save a 1 minute and 25 seconds
cooking program at 70%:
– Press button number "1" for 5 seconds in "Ready" mode.
The display (A) shows the wording "PROGRAM".
– Press button number "3". The program will be saved on this number.
– Press button (C).
The display (A) shows the wording "00:00".
– Enter the cooking time using numbered buttons "1", "2", "5" (1 minutes and 25 seconds)
and select the cooking power using button "Med-Hi/70%".
The display shows "1:25 70" (1:25 indicates the cooking time, 70 indicates the power
level).
– Press button (F) to save the commands.
– Press button number "3" and close the door to start the just saved program.
EN
Just press button number "3" every time this program is to be used, until it is necessary to
modify the program again.
Double cooking time
Use button (D) to easily modify the time pre-set for a quantity of product.
– The appliance starts cooking with the pre-set amount of cooking time if button (D) is
pressed in "Ready" mode, followed by the start-up of a pre-set program or vice-versa.
Display (A) shows the wording "Double" and the selected cooking time is doubled.
example:
Button number "5" and its predefined time is of 1 minute. Therefore, press (D), and the time
will change to 01:00 * (1 + 1) = 2:00 (2 minutes).
– The appliance enters "End of cooking cycle" mode during the program's final cooking.
Important
This function cannot be used in memory mode.
- 36 - English language