Fimar EASY LINE MF/914 Manual De Uso Y Mantenimiento página 79

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MC/1800 MICROWAVE OVEN
Programming mode
Different cooking programs can be
created.
– Open the door and keep button
number "1" pressed for 5 sec-
onds. An acoustic signal will fol-
low to warn access to the
"Programming mode".
The display (A) shows the word-
ing "PROGRAM".
– Press one of the numbered but-
tons ("1,2,3,..0") depending on
which button the new cooking
program being created is to be
saved.
Display (A) shows the cooking
time modifiable using the num-
bered keys.
– Press one of the (B) buttons to
enter the wanted power level,
once the cooking time has been
set.
Display (A) shows both the set
cooking time and the power lev-
el.
– Press button (F) to save the program.
– Press the numbered button initially selected for saving the program, to start the saved
cooking program.
Press button (C) before pressing button (F) to allow entering other times and power levels
in the same cooking program, if different cooking phases during that program are needed.
The appliance quickly emits an acoustic signal for three times and display (A) shows the
wording "00:00" to indicate the program is unacceptable, should the total cooking time ex-
ceed the maximum admitted time (60 minutes by default).
– Close door to activate the "Ready" mode.
The appliance enters "Open Door" mode and the program being created is lost, if button (E)
is pressed during the programming process.
The recorded program will not be lost in case of blackout.
- 35 -
EN
English language