urmet domus 1092/601 Manual De Instrucciones página 33

WALL FITTING

Make sure that no units are powered before starting the installation procedure.

Position the rubber o-ring (included) on the wall bracket in the specific seat.

Insert the dome connection wire (included) in the bracket until it protrudes from the opposite side.

Position the threaded union ring (included) in the upper seat of the dome making sure to align the
three holes present on the dome with the three holes on the threaded ring using the references on
both sides.

Connect the wire terminal board to the dome terminal board as shown in the figure.
DS1092-041C
All manuals and user guides at all-guides.com
33