Connecting The Power Cord - Pioneer SDV-P7 Manual De Instalación

Connecting the Power Cord

This product comes with two kinds of power cord. Use the short cord when installing this
product in the dashboard, and the long cord when installing it on the floor.
This Product
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side
of the parking brake switch.
All manuals and user guides at all-guides.com
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
Power supply side
Ground side
Red
To electric terminal controlled by ignition
Fuse resistor
switch (12 V DC) ON/OFF.
Yellow
To terminal always supplied with power
Fuse holder
regardless of ignition switch position.
Black (ground)
To vehicle (metal) body.
Connection method
1. Clamp the parking brake
switch power supply side
lead.
2. Clamp firmly with
needle-nosed pliers.
Parking brake switch
Fig. 6
8