dirna Bergstrom SLIM Instrucciones De Montaje página 14

SLIM
EN
2 CABIN EXTERIOR:
Position the Slim in the hatch gap on the original
edgeband, fitting the aligners in the hatch gap.
3
Remove (4) screws from the interior air
distribution panel and leave this supported by
the cables.
4
Position fastening
upholstery with flat washer, grower washer and
M8/125x50 screw, and tighten until they come up
against the hexagons of the base.
mounts underneath
Hatch
2
3
the
4
14
®
2