Tripp-Lite BP48V60RT3U Guia De Inicio Rapido página 2

Ocultar thumbs Ver también para BP48V60RT3U:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

COLOR SELECTION
The BP48V60RT3U is shipped with matching grey
front panel and grey mounting ears. If you would
like your Battery Pack to match black equipment,
you may request the alternate (black) front panel for
3U battery packs(Tripp Lite part #AC4134) by
calling (773) 869-1234.
SUGGESTED RACKMOUNT
INSTALLATION FOR 4-POST
ENCLOSURES
1) Loosen the wingnuts (A) on each of the two
adjustable side supports (B); adjust the length
of the supports to match the depth of your rack;
tighten wingnuts. Mount both side supports in
the lowest space of your rack on the inside
surfaces of the rails with user-supplied #10-32
rack bolts and washers (C). Note: Both support
ledges should face inward. The side supports'
front and back holes are threaded and do not
require nuts to secure the rack bolts.
2) Attach mounting ears (D) to the front mounting
holes of the Battery Pack (E) using the screws
and washers provided (F). Do not attach the
mounting ears to the Battery Pack's middle holes.
3) Using an assistant if necessary, lift the Battery
Pack and slide it onto the side supports within
your rack. Mount the battery pack by screwing
user-supplied rack bolts (G) through its mount-
ing ears, through the rack rails and through the
side supports.
2
All manuals and user guides at all-guides.com
C
E
D
G
Figure 3 (4-Post)
C
A
B
Figure 1 (4-Post)
F
Figure 2 (4-Post)

Publicidad

Tabla de contenido
loading

Tabla de contenido