Grundig MC 8340 Manual Del Usuario página 21

OPERATION ________________________
To change the batteries press
7
the button "PRESS" at back side
of clipper and pull out the bat-
tery pack of the clipper. Insert
the second battery by sliding in
until it clicks accordingly.
Additional battery keeps being
7
charged on as long as it is in
the charging stand which is con-
nected to the mains.
The cordless operating time is
7
about 80 minutes per battery
pack (160 minutes in total with
the standby pack).
Operating with the
power adapter
Check that the voltage indicated
on the rating plate of the power
adapter corresponds to your local
power supply.
The only way to disconnect the ap-
pliance from the power supply is to
unplug the power adapter.
1 Plug the charging plug into the
appliance socket and the power
adapter into the wall socket.
– The appliance is now ready
to operate.
Caution
When in the bathroom or beside
7
a water connection, only use
the appliance in battery mode;
never run it from the mains.
Notes
Trimming length without comb
7
system is 1.5 mm.
Width of cutting head is 45 mm.
7
1
Slide the clipper into the chosen
comb . Make sure that the
A
comb notches on the combs are
fully inserted into the grooves on
the sides of the appliance and
that they click into place.
2
After use, remove the comb from
the appliance.
Hair trimming
Make sure the hair is clean and
completely dry.
Place a towel around the neck
7
and shoulders of the person
whose hair you are trimming.
Make sure the person is seated
so that his or her head is roughly
at your eye level.
Before trimming, comb the hair
7
so that it falls naturally and you
can see the direction in which
it grows.
ENGLISH 21