Sauder New Grange 419128 Instrucciones De Montaje página 19

Step 14 Step
Separate the EXTENSION SLIDES (T) from the EXTENSION RAILS (S) as
å
shown in the enlarged diagram below. Be prepared, the parts are greasy.
Fasten the EXTENSION RAILS (S) to the LONG EXTENSION BLOCKS (K).
å
Use four GOLD 5/16" FLAT HEAD SCREWS (3S).
NOTE: Slide the inner cartridge of the EXTENSION RAIL in to fi nd the
å
holes that line up with the holes in the LONG EXTENSION BLOCKS. Turn
a SCREW into each hole.
Push the black lever in and pull the SLIDE from the RAIL.
www.sauder.com/services
T
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
S
Use these holes.
3S
419128
K
S
Open end
Page 19