Grillfürst G201 Instrucciones De Uso / Instrucciones De Instalación página 22

EN
4. Preparation
You will need to purchase a gas bottle and a 28-30/37 mbar regulator for I3+ and 28-30mbar regulator
for I3B/P(30), 50 mbar regulator for I3B/P(50),37 mbar regulator for I3B/P(37) to operate this gas
grill which can be obtained from your nearest Gas Retailer. The gas cylinder is recommend to 5kg
LPG gas bottle, it is sufficient for a heating period of approx.15.5 hours with full power.
See point 9 for further instructions.
Strongly Recommend Information:
a) The gas cylinder is to be used only in the upright position.
b) Only to be used with a gas cylinder that does not exceed 600 mm in height
and < 245mm and >310 mm in diameter.
c) This appliance must only be used with an approved hose and regulator.
Connecting the pressure regulator to a screw-in cartridge.
If you need to use a 450g propane-butane mixture disposable gas cylinder, you need a special pressure
regulator provided by the dealer. it can be used continuously for 1.4 hours at full power.
The pressure regulator should be complied with EN16129 with current version and national regulation.
Before installing the gas cylinder, make sure
that all valve body switches are closed. Screw
the gas cartridge onto the pressure regulator
anti-clockwise the underside.
After installing the gas cylinder, you need to
turn on the valve body switch. According to the
operation on the below steps, check all
connections for air leaks.
Do not use if there is air leakage, please close
the valve and contact the dealer.
If your barbecues intended to be supplied by a
LPG installation leisure vehicle, the vehicle
should complied with EN1949 with special
connection.
your barbecues only can be supplied by LPG installation leisure vehicle in Germany or UK.
Only to be used out of vehicle!
Energy saving tips:
a) Reduce the opening time of the lid.
b) Turn the grill off as soon as cooking is completed.
c) Preheat the gas grill for 10 to 15 minutes only. (Except for the first use)
21