Fermax SLIM Manual De Usuario página 8

Cod. 97848 V09_18
AXESKEY (L-BUS) CONFIGURATION:
- Press the configuration button until the pilot light gives a series of flashing green indications and keep it pressed
down until the number of long red signals corresponds to the channel to be configured. For example, if you want to
configure channel 2, release the button after the second long signal.
IPAXES UNIT (S-BUS) CONFIGURATION:
- Press the configuration button until the pilot light gives a series of flashing green indications and four long red
indications and keep it pressed down until the number of long green signals corresponds to the channel to be
configured. For example, if you want to configure channel 2, release the button after the second long green signal.
The procedure can be carried out as many times as required.
Maintenance
FACTORS INFLUENCING THE OPERATING DISTANCE
Orientation of the proximity key. Faulty reader supply. Interference on the 13.56 MHz band.
CE DECLARATION OF CONFORMITY
Hereby, FERMAX ELECTRONICA, S.A.U., declares that this SLIM REF. 5255 , is in compliance with the essential
requirements of Directive RED 2014/53/UE and Directive RoHS 2011/65/UE. See website www.fermax.com.
FERMAX Avd. Tres Cruces, 133, 46017 Valencia, Spain.
http://docweb2.fermax.com/docs/decconformidad/EN/F05255.pdf
8
3200284 REV01