Insert
The insert can be removed to provide a mesh seating area
for better ventilation during hot weather.
1
- To remove the insert, release the velcro on insert from
the back of the seat, unbuckle the harness, thread the
harness through the harness slots and remove the seat
pad. (35)
DO NOT remove the backrest tube.
Reverse Seat
The seat can be used rear or forward facing.
1
- Squeeze the seat release buttons and lift the seat up.
(36)
2
- Turn the seat in the opposite direction and place on the
seat mounts until it clicks into place. A "click" sound
means the seat is attached. (37)
Check to make sure seat is securely attached by
pulling up on it.
Fold
Before folding, push the canopy to the rear of the pushchair.
1
- Squeeze the recline adjustment button on the back of
the seat (38)-1 and rotate the backrest to the stored
position. (38)-2
2
- Pull up on the folding buttons (39)-1 and push the
pushchair forward to fold. (39)-2
3
- The storage latch will engage automatically when the
pushchair is completely folded. (40)
17
MIXX Pushchair Instructions
Accessoires
Car Seat Adaptor
When using MIXX with the Nuna PIPA series infant car seat,
please refer to the following instructions.
1
- To attach the adaptors, place the adaptors onto the seat
mounts as shown. A "click" sound means the adaptors
are locked. (41)
2
- To attach the infant carrier, place the infant carrier onto
the adaptors as shown (42), A "click" sound means the
delete extra space infant carrier is locked. (43)
3
- To remove the infant child carrier, lift the infant carrier
up (44)-2 while pressing the pushchair release buttons.
(44)-1
4
- To remove the adaptors, lift the adaptors up (45)-2 while
delete extra space pulling the release buttons. (45)-1
MIXX Pushchair Apron
The soft apron can provide your child with a warm and
comfortable environment.
1
- Place the apron over the seat, fasten the snaps on the
apron and seat (46)-1, repeat on the opposite side.
2-
The assembled apron is shown as (46).
MIXX Pushchair Instructions
18