Infant Car Seat Post Adaptors; Seat & Carry Cot Post Adaptors - Nuna demi grow Manual Del Usuario

Ocultar thumbs Ver también para demi grow:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
2
- Before placing the footmuff on the pushchair/sibling
seat, unzip and open the front cover of the footmuff.
(53)
3
- Place the footmuff on the pushchair/sibling seat and pull
the shoulder harness webbing and buckles through the
slots on the footmuff. (54)
Reassemble the shoulder harness pads, crotch pads and
head support and attach the arm bar.
4
- Zip on the front cover of the footmuff. (55)
5
- Fold the footmuff flap over the pushchair arm bar. (56)

Infant Car Seat Post Adaptors

For infant carrier assembly and usage, please refer to the
infant carrier instruction manual.
When installing the infant carrier in the lower mount, fold
the canopy.
1
- To attach the infant car seat post adapters, place the
infant car seat post adapters on the seat mounts. A
"click" sound means the infant car seat post adapters
are attached. (57)
2
- To attach the infant carrier, place the infant carrier
on the infant car seat post adapters. A "click" sound
means the infant carrier is attached. (58)
3
- To remove the infant carrier, push the pushchair release
buttons on the infant carrier (59)-1 and lift up (59)-2.
4
- To remove the infant car seat post adapters, pull the
adapter release buttons (60)-1 and lift up (60)-2.
22
DEMI grow pushchair instructions
5
- The infant car seat post adapters can be attached rear
facing (61)-1 or forward facing (61)-2 in the upper mount.
Remove the infant carrier before folding.
Seat & Carry Cot Post Adaptors
Only be able to assemble the seat & carry cot post
adaptors on the upper mount.
Please use seat & carry cot post adaptors on upper
mount when using the upper mount and lower mount
simultaneously and both with front facing mode.
1
- To attach seat & carry cot post adaptors, place them
onto mounts as shown (62). A "click" sound means the
seat & carry cot post adaptors are locked. (63)
The correctly use of seat & carry cot post adaptors are
shown as (64).
2
- To attach carry cot to the seat & carry cot post adaptors,
place carry cot onto seat & carry cot post adaptors, A
"click" sound means the carry cot is locked. (65)
Please do not use carry cot on the upper seat when the
seat back of lower seat is in vertical position.
3
- To attach seat to the seat & carry cot post adaptors,
place seat onto seat & carry cot post adaptors, A "click"
sound means the seat is locked. (66)
4
- To remove carry cot, press the carry cot release buttons
(48)-1 and lift up (48)-2.
5
- To remove the seat, squeeze the seat release buttons
(16)-1 and lift the seat up (16)-2.
6
- To remove seat & carry cot post adaptors, lift the seat &
carry cot post adaptors upwards (67)-2 while pulling the
release buttons. (67)-1
Remove the seat & carry Cot before folding.
DEMI grow pushchair instructions
23

Publicidad

Tabla de contenido
loading

Tabla de contenido