How to Use
SETTING THE TIMER
Twist the bottom of the device until
desired timer setting (10, 20, 30 minutes).
The timer will begin counting down each time the device is
turned on. At the end of the timer cycle, all sound and light
functions will turn off automatically.
NOTE: Changing any setting (timer, sound or light)
while the device is on will reset the timer.
CHOOSING A SOUND
Press the sound button
to turn on the fi rst sound. Press again to toggle through
sound options.
SOUND OPTIONS
Sound Option 1:
Sound Option 2:
Shhh
White Noise
Press or hold
or
buttons to control volume.
To turn off all functions at any time, press and hold
USING THE NIGHTLIGHT
NOTE: The light function can be used by itself or in addition to a sound option.
Press the light button
to turn on the pulsing light. Press again to toggle through light
options.
NIGHTLIGHT OPTIONS
Light Option 1:
Light Option 2:
Gentle Pulse
Constant
To turn off only the light, press and hold for
will continue.
6
is aligned with your
Timer Settings
Sound Option 3:
Press Again:
Heartbeat
OFF
for 2.5 seconds.
Press Again:
OFF
2.5 seconds. Any sound option selected
SECURING THE HAND STRAP
Guide the small loop at the end of the strap through the
eyelet on the base.
Pull the rest of the strap through the loop.
CHANGING THE BATTERIES
1. Twist the timer until
is set to 30. Using a Phillips-head
screwdriver, unscrew the base.
2. Unscrew the battery compartment and insert two new AA batteries.
1
NOTE: When putting the base back on, align
CARE AND CLEANING
Clean and inspect the Shhh...™ before use. Wipe with a damp cloth and air dry. Do not
immerse in water or allow water inside through openings.
CONTACT US
If you have any questions or wish to provide comments about this product, feel free to
contact our Customer Satisfaction team at 1-800-344-2229 (M-F from 8:00am-5:00pm
PST) or visit our website at www.munchkin.com.
How to Use |
Customer Service
2
with 30 to ensure correct orientation.
7