Fujitsu S4-0812 Guia Del Usuario página 33

target device and the connection type, such as video.
To view connections properties:
1. Select a target device in the Unit list.
2. Complete one of the following steps:
• Select View-Properties from the Explorer menu.
• Click the Properties button.
• Right-click on the unit. Select Properties from the pop-up menu.
The Properties window opens.
3. Click the Connections tab to view the connections of the server. Connections
properties are available only for servers and are read-only. The display
indicates the physical connection path that is used to access this device and
the connection type, such as video.
4. When finished, click OK or Cancel to close the window.
VNC Properties
When you indicate a user-specified VNC application, you may include its
command line arguments. A selection of macros is available for placement in the
command line; this may be useful for automatic replacement of variables such as
IP address, port number, user name and password. For VNC commands that do
not provide their own GUI, such as those for computers running Windows, Linux
and Unix operating systems, you can launch the VNC application from within an
®
OS command window.
To change VNC properties:
1. Select a switch or server in the unit list.
2. Select View-Properties from the Explorer.
— or —
Click the Properties task button.
— or —
Right-click on the unit. Select Properties from the pop-up menu.
The Properties dialog box appears.
3. Click the VNC tab.
590-1059-640A
All manuals and user guides at all-guides.com
3.7 Customizing properties
27