Programming Instructions; Display Functions; Push Buttons - Black and Decker BXCO1000E Manual Del Usuario

♦ Fill the removable filter (C) with ground coffee (use 6-7
grams of ground coffee for each cup to be made).
♦ Check that the removable filter is correctly placed in the
filter holder and the lid (A) is properly closed.
♦ You can use the measuring spoon (L) to add coffee.
USE
Before the first use
♦ To ensure excellent coffee from the first cup, we recom-
mend rinsing with warm water as follows:
♦ Pour 1.25L of water into the tank (D).
♦ Place the Permanent Filter (C) in the funnel (B),
empty, without coffee and close the lid (A) of the coffee
machine.
♦ Place the jug (F) on the hotplate (G).
♦ Connect to the mains. It will be displayed on the screen
12:00.
♦ Press ON/OFF button once, the red (ON/OFF) indicator
is illuminated. It means machine is connected.
♦ The water will start to come out in a few seconds.
♦ When the water stops flowing, empty the jug, clean the
permanent filter (C) and the funnel (B).
♦ The machine is ready to make coffee.
♦ If you would like to stop the machine, press ON/OFFand
the machine will stop.
To make coffee directly, without program-
ming
♦ Fill the tank (D) with cold water according to the Water
Filling Section.
♦ Use the amount of water you need.
♦ The jug and tank water level indicates the number of
cups.
♦ Add ground coffee according to the Coffee Filling
section.
♦ Place the jar on the hotplate.
♦ Connect to the mains. It will be displayed on the screen
12:00.
♦ Press ON/OFF button once, the red indicator is illumi-
nated.
♦ The coffee will start to come out in a few seconds.
♦ The jug (F) can be removed while the coffee is being
made. The anti-drip system prevents the coffee from
driping when the jug is not in position. However, time can
not exceed 30 seconds, otherwise the filter may overflow
from the edge of funnel.
(Original instructions)
♦ When you finish making coffee, you can stop the
machine.
♦ If you would like to stop the machine, press ON/OFF and
the machine will stop.
♦ If not, the coffeemaker will automatically switch to Keep
Warm and after 40 minutes, the coffee machine will
switch off automatically.
♦ WARNING: Do not leave the coffee machine unattended
while making coffee
Once the appliance is finished:
♦ Stop the appliance.
♦ You can press ON/OFF to stop, or you can just leave it
and it will turn off automatically after 40 minutes.
♦ Unplug the appliance from the main.
♦ Clean the device.
PROGRAMMING
INSTRUCTIONS

Display functions:

♦ Four-digit display for 24 hours, shows current time and
scheduled time,
♦ Red LED indicaties that the appliance is heating up
♦ Green LED indicates that the device is waiting for the
timer.
♦ When the plug is plugged to the main and both LEDs are
off, the display will show either the current time or the
preset time.

Push buttons

♦ ON / OFF" button. If you press the "ON / OFF" button,
the appliance will begin to prepare coffee
♦ The appliance will turn off automatically after 40 minutes
and then the display will show the current time.
♦ Press this button when the green LED is on, and you
want to cancel the scheduled start time
♦ "AUTO" button: It is the switch for automatic start-up.
♦ "PROG" button: To set the timer, you must press the
"PROG" button once, to start setting the required time
♦ Then press again the "PROG" to change the device to
standby condition (indicated by green LED on)
♦ Pressing "AUTO" will cancel the preset timer program.
ENGLISH
5