Technical Specifications - Flex ALC 3/1-Basic Manual Del Usuario

ALC3-1.book Seite 15 Donnerstag, 25. Juni 2015 1:00 13

Technical specifications

Cross-line laser ALC 3/1
Visible laser diode
Laser class
Work area
– Horizontal/vertical beam
– Ground beam (plumb)
Precision ...
– Horizontal/vertical beam
– Ground beam (plumb)
Self-levelling range
Power supply
2)
Operating duration
Temperature range
– for operation
– for storage
Weight (with batteries)
All manuals and user guides at all-guides.com
635–650 nm
2
1)
20 m
5 m
± 0.3 mm/m
± 0.6 mm/m
± 4°
3 x LR6/AA
6 h
–5 °C ... 50 °C
–20 °C ... 70 °C
584 g
1) The measurement range may be less under
unfavourable conditions (bright sunlight,
reflective surfaces).
2) The operating duration was determined with
all activated laser beams.
The operating duration can be extended
if beams which are not required are switched
off by selecting a different operating mode.
Instructions for use
WARNING!
– Do not point the laser beam at people
or animals.
– Do not look into the laser beam.
– Do not put any optical instruments in the
path of the beam.
This measuring instrument generates laser
radiation which may cause blindness.
CAUTION!
– Do not use the measuring instrument
in a damp, dusty or sandy environment.
Device components may be damaged.
– After using the device, immediately switch it
off with the On/Off switch in order to block
self-levelling.
FLEX ALC 3/1–Basic