Technical Specifications; Operating Instructions - Flex ALR 411 M Instrucciones De Funcionamiento

Technical specifications

Order number
Precision
Operating modes:
– Rotating laser beam (standard)
– Scan 1: line
– Scan 2: oscillating beam
– Point
– Additional: Vertical beam (hairline
function)
Range:
– rotating laser beam
– Point function
– Scan function
– Remote control
Speed of rotation
Operating time (batteries)
Visible laser diode
Laser class
Weight (ALR batteries)
* depending on the ambient light
14

Operating instructions

311.294 Before switching on the power
tool
±3 mm/10 m
Unpack the power tool and check that the
delivery is complete and not damaged.
Before using the power tool for the first time
– Insert the battery into the remote control,
– Insert batteries into the machine.
Mains mode
The machine can be used with a standard
power supply unit (6 V d.c., 2.5 mm jack
plug).
Connect the power supply unit to the socket
(15).
approx.
Using batteries in the power tool
10 m*
approx.
If the LED (3) flashes, replace the battery
30 m*
set.
approx.
Required batteries:
20 m*
– 4 x type AA / 1.5 V
approx. n Open the battery compartment (14)
50 m*
n Insert the batteries the correct way
0–350/min
n Close the battery compartment.
~18 h
Batteries for the remote control
635–670 nm
2
The button configuration on the remote control
0.87 kg
corresponds to the buttons on the ALR.
The power tool can only be switched off with
the remote control.
Note
on the machine.
round.
Note
Rotational laser