Troubleshooting; Declaration Of Conformity - Bluewheel HX350 Manual De Usuario

All manuals and user guides at all-guides.com

6. Troubleshooting

Problem
The product does not
work.
The warning-LED
(7) flashes
red
and a warning
signal emits.

7. Declaration of Conformity

Hereby Innovamaxx GmbH, declares that the Bluewheel HX350 B-Scooter
is in compliance with the essential requirements and other relevant
provisions of directives . The declaration of conformity can be found in the
attachment.
Cause and correction of the defects
• The product is not turned on.
à Press the ON / OFF button (2) to turn the product
on.
• The battery is not fully charged.
à Charge the battery.
• A substantial impact (e.g. overturning of the product
when stepping off) has shaken the product. The
warning-LED (7) lights up red.
à Turn the product off and on again.
• You are driving too fast.
à Reduce the speed and step off slowly and carefully.
• You are driving over steep slopes.
à Reduce the speed and step off slowly and carefully.
• The wheels (3) are blocked up.
à Reduce the speed and step off slowly and carefully.
Remove leaves, small stones and similar objects
which are blocking the wheels.
• The battery capacity is too low.
à Reduce the speed and step off slowly and carefully.
Charge the battery completely.
19