Initial Use - Beko HBA7753X Manual Del Usuario

Operation
3

3.3 Initial use

1. Clean the appliance parts before
initial use (see 4.1).
2. Use the appliance upright on
a balanced, flat, clean, dry and
non-skid surface.
3. Do not use the appliance
continuously for more than 10
seconds. Turn off the device
when used for more than 10
seconds and wait for 1 min.
before operating again.
When you do not
exceed 10 seconds
in intermittent uses,
C
you can operate the
appliance until the
end of the process by
waiting for a couple
of seconds.
10 / EN
All manuals and user guides at all-guides.com
3.4 Blending and
chopping with the
blending shaft
1. Insert blending shaft (13), by
2. Put processed ingredients (in
3. Immerse blending shaft (13) into
4. Plug in the appliance.
5. Run the appliance by pressing
aligning ( ) symbol on motor
unit (3) with ( ) symbol and tur-
ning clockwise.
– Make sure ( ) symbol is
aligned with ( ) symbol. Fit it
into its place, do not apply too
much force.
small pieces) in measuring con-
tainer or a container that you
will use.
the container.
operation button (2).
Turn speed adjust-
C
ment button (1) to
gradually
speed.
Hand Blender/User Manual
increase