Tabla De Contenido; Description; Safety; Purpose Of This Manual - Greenlee 1800 Manual De Instrucciones

Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ......................................... 3
Setup .............................................................................. 4
Operation ........................................................................ 4
Maintenance ................................................................... 4
Illustrated Bending Glossary .......................................... 5
Bending Conduit .........................................................6-7
Special Bending Information .....................................8-12
Illustration ..................................................................... 13
Parts List ...................................................................... 14
Greenlee Tools, Inc.

Description

The 1800 Mechanical Bender is a manually powered
bender intended to bend 1/2", 3/4" and 1" rigid conduit,
IMC (intermediate metallic conduit), and Schedule 40
pipe.

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.

Purpose of this Manual

This instruction manual is intended to familiarize person-
nel with the safe operation and maintenance procedures
for the Greenlee 1800 Mechanical Bender.
Keep this manual available to all personnel.
Replacement manuals are available upon request
at no charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
KEEP THIS MANUAL
2
1800 Mechanical Bender
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070