Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Chose option "New valve"
Input valve data
(Manufacturer, Valve type,
Diameter, Part number and
presettings)
Confirm input
Then select valve as described above.
6.3.3 Data up- and download
•
Connect the BasicMes-2 to computer with USB cable
•
Activate USB data exchange (see chapter "USB Data
Exchange" above)
•
Click onto "Send" to upload and "Receive" to
download data
Data is uploaded to the BasicMes-2 or downloaded.
Existing data is overwritten!
6.3.4 Print reports
The BasicMes-2 offers the following reports:
Report
Balancing report – all risers
and measuring results
Measuring protocol –
measuring results of riser
selected in tree structure
Leakage test protocol –
results of leakage test
Log protocol – results of data
log
6.3.5 Display realtime measurement
Used to display measurements on a computer screen in real
time
•
Connect the BasicMes-2 to computer with USB cable
•
Activate USB data exchange (see chapter "USB Data
Exchange" above)
•
Select menu "Device" and menu item "Online
measurement"
A new window opens with the following functions:
Operation
Start online measurement
Stop online measurement
Print protocol of measuring
results
Save measuring results to an
Excel spreadsheet
For online measurement the following options are available:
MU2H-2323GE25 R0620
Command
Right click onto "Valves" in
tree structure
OK
Command
"Print protocol" on screen
"Project"
"Print protocol" on screen
"Measuring results"
"Print protocol" on screen
"Leakage test"
"Print protocol" on screen
"Logger"
Command
START
STOP
PRINT PROTOCOL
SAVE AS EXCEL FILE
GB
•
Display of time axis in real time or time difference
•
Selection of values to be shown on left or right border
of graph
6.3.6 Display results of leakage test or
data logger
Results of a leakage test or a data log are shown on the
respective pages. From there they can be printed or saved to
an Excel spreadsheet.
6.3.7 Valve Database
Used to add, modify or delete valves from the valve database.
The valve database can be uploaded to the BasicMes-2.
•
To access valve database select menu "Device" and
menu item "Valve database"
Add valve to valve database
•
To add a valve to the database right click onto "Valves"
in the tree structure, then click onto "New valve"
•
Fill fields "Manufacturer, Valve type, Diameter, Part
number and Pre-settings with data
•
Click "OK" to add the data to the database or "Cancel"
to abort the operation
Modify valve in valve database
•
To modify a valve in the database right click onto the
DN size of the valve, then click onto "Change valve
data"
•
Change fields as required
•
Click "OK" to change data or "Cancel" to abort the
operation
Delete elements from valve database
The following options are available:
•
Deletion of one certain size
•
Deletion of all sizes of a certain valve type
•
Deletion of all valves of a certain manufacturer
•
Deletion of all valves
•
To delete a valve size, valve type, manufacturer or all
valves from the database right click onto the
respective point in the tree structure, then click onto
the delete option
Deleted elements are immediately erased and cannot
be restored unless saved beforehand
6.3.8 Update firmware of BasicMes-2
Used to update the firmware of the BasicMes-2, e.g. to
include a new language. Update files are available from
Resideo.
Do not interrupt power supply or USB connection
between PC and the BasicMes-2 during firmware
update. Pay attention that batteries are charged
sufficiently. The update will erase all settings and
customer data stored in the BasicMes-2. Calibration
data will be kept.
11
Publicidad
Tabla de contenido
