Before Using The Appliance The First Time; Making Ice Cubes - Unold 48946 Instrucciones De Uso

thorized repairs can result in
serious risks to the user and
void the warranty.
27. If the supply cord is dama-
ged, it must be replaced
by the manufacturer or its
Never open the housing of the appliance. This can result in elec-
tric shock.
After unpacking, please do not operate the appliance for at least
two hours. The coolant in the appliance has to first settle, to
prevent damage to the compressor.
The manufacturer will not be liable in the event of improper or incorrect use or if repairs are carried out
by unauthorized third parties.

BEFORE USING THE APPLIANCE THE FIRST TIME

ƒ When unpacking the appliance and removing the packaging material, make
sure not to tilt the appliance more than 45 °, to prevent damage to the
compressor inside the appliance.
ƒ If you wish to move the appliance, please use the handles on the bottom
of the appliance.
1. Remove all packaging materials
and any transport safety devices.
2. Check to make sure that all acces-
sories are present.
3. Clean all parts with a damp
cloth, as described in the chapter
"Cleaning and care".
4. Check to make sure that all parts
are assembled correctly and the
appliance is stable and level.

MAKING ICE CUBES

1. Prepare the appliance as descri-
bed in the section "Before using
the appliance the first time".
2. Remove the ice container (4)
from the appliance by pulling it
forward.
22
All manuals and user guides at all-guides.com
5.
6.
7.
3.
service agent or a similarly
qualified person in order to
avoid a hazard.
Now connect the power cord to
the back of the appliance.
Connect the appliance via the
power cord to the power supply
(220–240 V~, 50 Hz).
The indicator lamp for medium
ice cubes (12) blinks green.
Fill the water tank with fresh,
clear, cold water to the "Max"
marking. Do not fill water past the
"Max" marking to prevent water
from spilling out. Ice cubes can-