Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Basic Operations
Switching the FM/AM Tuning
Step
Set the FM/AM tuning step of your country.
1
Press HOME, touch [Settings] [General]
[Tuning Steps], then set the FM/AM tuning
step.
2
To exit the setup menu, touch
three times.
Pairing with a BLUETOOTH Device
When connecting a BLUETOOTH device for the first
time, mutual registration (called "pairing") is
required. Pairing enables this unit and other devices
to recognize each other.
1
Press HOME, then touch [Settings]
[Bluetooth] [Bluetooth Connection] [ON]
[Pairing].
flashes while the unit is in pairing standby
mode.
2
Perform pairing on the BLUETOOTH device
so it detects this unit.
3
Select your model name shown on the
display of the BLUETOOTH device*.
When pairing is made,
* If passkey input is required on the BLUETOOTH device,
input [0000].
Connecting Rear View Camera
By connecting the optional rear view camera to the
CAMERA IN terminal, you can display the picture
from the rear view camera. For details, see
"Connection/Installation" (page 11).
To display the picture from the rear view
camera
Press HOME, then touch [Rear Camera].
(back)
stays lit.
Canceling the Demonstration
Mode
1
Press HOME, then touch [Settings].
2
Touch [General], then touch [Demo] to set to
[OFF].
3
To exit the setup menu, touch
twice.
Updating the Firmware
To update the firmware, visit the support site
(page 20), then follow the online instructions.
Note
During the update, do not remove the USB device.
(back)
7
GB
Publicidad
Tabla de contenido
