Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com

Programming For VCR

Most GE, RCA and ProScan VCRs will not
require programming. Check to see if your
VCR responds to the remote before you
begin programming.
1. Manually turn on the VCR. Find the
three digit code for your VCR in the code list
below.
2. Press and hold the
CODE SEARCH button
until the INDICATOR
LIGHT lights, then
release the CODE
SEARCH button.
3. Press and release
the VCR button (The
INDICATOR LIGHT
will blink then remain
lit.
4. Enter the code
using the Number
Buttons. After your
code is entered, the
INDICATOR
LIGHT will turn off. If
the code is not valid,
the INDICATOR LIGHT
will blink. Check the
code list and repeat
process.
5. Aim the remote at
your VCR and press the
ON•OFF button. Your
VCR should turn off.
NOTE: If your VCR does not respond, try
all the codes for your brand. If the codes do
not work, or your brand is not listed, try the
Code Search method.
6. With your VCR on, press CHAN+
(CHANNEL UP). If the VCR responds, no
further programming is required.
7. Enter your code here for easy reference.
CODE
SEARCH
INDICATOR
LIGHT
VCR
(BLINK)
1
2
3
4
5
6
7
8
(OFF)
9
0
ON•OFF
CHAN +
VCR CODE
6

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Universal rm24925

Tabla de contenido