Omega NC900HDSS Manual Del Usuario página 21

IF THE AUGER STOPS WORKING
1
2
1. Press [Rev] button for 3 to 5 seconds,
then release. When the [Rev] button is
released, the auger will stop rotating.
Repeat this 2 to 3 times.
The [Rev] button pushes the ingredients
upward releasing the food clog.
2. Press [ON] button to operate properly.
When using the [ON] or [Rev} button,
make sure the auger stops completely
after stopping or releasing the button.
Note:
Even after following the directions
above, if the juicer still doesn't work,
please unplug the power cord,
disassemble the chamber set and clean
it. Then try again.
19