KEYPAD
FEATURE
FROZEN
Prepackaged
BAKE
food
CONVECT
Convection
BAKE
baking and
roasting
BROIL
Broiling
START
Cooking start
DELAY
Delayed start
COOK TIME
Timed cooking
CANCEL
Range function
TEMP/TIME
Temperature and
time adjust
INSTRUCTIONS
1. Position the food on a flat rack in the oven on rack position 4. See the "Positioning Racks and
Bakeware" section.
NOTE: Cook only 1 package of frozen food at a time when using Frozen Bake™ Technology.
2. Press FROZEN BAKE LASAGNA or PIZZA.
3. Press the Temp/Time "up" or "down" arrow keypad to set the temperature as recommended
on the food packaging.
4. Press COOK TIME.
5. Press the Temp/Time "up" or "down" arrow keypad to set the maximum cook time as
recommended on the food packaging.
6. Press START. The range will calculate the best cook time based on the current oven temperature.
NOTE: The cook time that appears in the display is the estimated required cook time as
calculated by the oven control. It may be different than the time you entered. A beep will alert
you to check the food's doneness with at least 2 minutes remaining on the timer. Follow the
prompts on the display to select more time if desired.
7. Press START to start the calculated time.
8. At the end of the cook time, a beep will alert you to check the food's doneness. Follow the
prompts on the display to select more time if desired. Unless more time is selected, the bake
element turns off.
9. Press CANCEL when finished.
NOTE: The convection fan will shut off when the oven door is opened. If the oven door remains
open for too long, the heating elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will continue to count down.
1. Press CONVECT BAKE.
2. Press Temp/Time "up" or "down" arrow keypad until desired temperature is reached. A tone
will sound if the minimum or maximum temperature is reached.
3. Press START.
4. To change the temperature, repeat Step 2. Press START.
5. Press CANCEL when finished.
NOTES:
There is a 5-minute delay before the convection fan turns on when starting a Convect
■
Bake cycle.
The convection fan will shut off when the oven door is opened. If the oven door remains
■
open for too long, the heating elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will continue to count down.
1. Position cookware in oven and close the oven door.
2. Press BROIL.
3. Press Temp/Time "up" or "down" arrow keypad until the desired temperature is reached.
A tone will sound if the minimum or maximum temperature is reached.
4. Press START.
5. To change the temperature, repeat Step 3. Press START.
6. Press CANCEL when finished.
NOTE: The convection fan will shut off when the oven door is opened. If the oven door remains
open for too long, the heating elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will continue to count down.
The Start keypad begins any oven function. If Start is not pressed within 5 seconds, a tone will
sound and Start will blink until pressed or canceled. If Start is not pressed within 1 minute after
pressing a keypad, the function is canceled and the time of day is displayed.
The Delay keypad is used to enter the starting time for an oven function with a delayed start. Delay
should not be used for foods such as breads and cakes because they may not bake properly.
To set a timed cook or a delayed timed cook, see the "Cook Time" section.
Timed cooking allows the oven to be set to turn on at a certain time of day, cook for a set length
of time, and/or shut off automatically.
To set a timed cook or a delayed timed cook, see the "Cook Time" section.
The Cancel keypad stops any function except Timer and Control Lock.
The Temp/Time "up" and "down" arrow keypads are used to adjust time and temperature settings.
5