Led Indicators - D-Link DES-1016D Manual De Instrucciones

All manuals and user guides at all-guides.com
The Switch can be used with AC power sources 100 - 240 VAC, 50 - 60
Hz. The Switch's power supply will adjust to the local power source
automatically and may be turned on without having any or all LAN
segment cables connected.
6

LED Indicators

The LED indicators of the Switch include Power, Link/Act, FDX/Col
and 100Mbps. The following shows the LED indicators for the Switch
along with an explanation of each indicator.
The Switch LED indicators
♦ POWER This indicator lights green when the Switch is receiving
power, otherwise, it is off.
♦ Link/Act. These LED indicators are lighted up when there is a
secure connection (or link) to any ports. The LED indicators blink
whenever there is reception or transmission (i.e. Activity--Act) of
data occurring at a port.
♦ FDX/Col This LED indicator light green when a respective port is
in full duplex (FDX) mode. Otherwise, it is blinking green when
collisions are occurring on the respective port.
♦ 100Mbps. These LED indicators are lighted up when there is a
secure connection (or link) to 100Mbps Fast Ethernet device at any
of the ports.
3