Antenna Setting - ENERGY SISTEM TV1070/90 Manual Del Usuario

Figure 1. Main Menu - Setup
5.1. SETUP
Set the system settings. See Figure 1.
5.1.1. Installation
Figure 2. SETUP - Installation Figure 3. SETUP - Installation (continued)
Set the receiving and playing program settings of EnergyTV. See Figure 2, Figure 3.

Antenna Setting

Set the antenna power on or off to supply +5V power to antenna or not.
Note: The default is OFF, set this option to ON only if EnergyTV is connected to an active antenna
which amplifies the received RF signal, otherwise please set it to OFF.
Country Setting
Set the country for Auto Scan, Manual Scan and Time Zone.
Note: Change the Country Setting will automatically change the default Time Zone and set the default
8