ENERGY SISTEM TV1070/90 Manual Del Usuario página 52

Press <Up/Down> button to select teletext subtitle language. Press <OK/Exit> button to exit the
setting page.
Figure 33. Teletext language
6.11. GUIDE
Press <EPG> button at normal play state, see section "Guide" on page 14 for details.
6.12. MESSAGES
There are some messages to inform user the current status of the EnergyTV.
≥
No Signal
If the EnergyTV can't get the signal, for example if the antenna cable is disconnected.
≥
No Service
Program doesn't have any contents to play.
≥
Encoded Service
Program is encoded for payment, you need to contact with the content provider to know how to
decode it.
≥
Antenna Overload
The power of antenna is overloaded.
≥
HDTV Not Support
If the program content is HDTV format, EnergyTV doesn't support it.
≥
Channel Locked
Program is locked by setting lock (see section "Lock" on page 13) and turning on channel lock in
password setting (see section "Channel Lock" on page 11). You must input the correct password to
watch the channel. See Figure 35.
Figure 34. Teletext subtitles
22