Troubleshooting - ENERGY SISTEM TV1070/90 Manual Del Usuario

7. TROUBLESHOOTING

If you experience problems with this receiver or its installation, in the first instance please read carefully the
relevant sections of this User Manual and this Troubleshooting section.
Problem Possible cause
No signal found Aerial is disconnected
Aerial is damaged/misaligned Check aerial
Out of digital signal area
No picture or Viewing incorrect output
sound
Encrypted channel It's a pay-per-view channel
message
No response from Device is switched off
remote control
Remote control is not aimed
correctly
Front panel is obstructed
Remote control batteries
inserted incorrectly
Remote control batteries
exhausted
Square blocks in Aerial may not be compatible
picture or picture
Aerial is damaged/misaligned Check aerial
freezes
Solution
Check aerial lead
Check with dealer
Press the DTV/AV button
Press the SCREEN button
Press the SPEAKER button
Select an alternative channel
Plug in and turn on the device
Aim the remote control directly at the sensor on the
front of the player
Remove any obstacles between the remote control
and the sensor
Check the polarity of the batteries
Replace the batteries if necessary
Check with dealer
24