Switching The Appliance On - Hilti DD-WMS 100 Manual De Usuario

3. Connect the other end of the suction hose to the water collector of the
diamond core drilling machine.
Use the tapered adapter if necessary.
4. Connect the other end of the water supply hose to the diamond core
drilling machine.
6 Operation

6.1 Switching the appliance on

WARNING
Electric shock hazard! Attempting care and maintenance with the supply
cord connected to a power outlet can lead to severe injury and burns.
▶ Always unplug the supply cord before carrying out care and maintenance
tasks.
WARNING
Risk of hazards through use of the product not as directed.
▶ This appliance is not suitable for picking up hazardous dust.
CAUTION
Risk of injury through incorrect operation.
▶ The appliance may be operated only by authorized, trained personnel.
This personnel must be specially informed of any possible hazards.
CAUTION
Risk of hazards through use of the product not as directed.
▶ Use the power outlet on the appliance only for the purposes described in
these operating instructions.
CAUTION
Risk of damage to the equipment or other property! Incorrect operation
may lead to damage to the tool.
▶ Switch the product off immediately if foam or liquid escapes from it.
1. Connect the hose set to the diamond coring machine. → page 11
2. Set the control switch to the desired operating mode.
12 English 2154324
*2154324*