2.3. Mechanical protective devices
The machine is equipped with the following protective
devices:
● complete panelling protection of all the parts
subject to heat and of the steam and hot water
supplier;
● cup-warmer plate supplied with a tray to collect
spilt liquids;
● work surface provided with grill and tray to collect
spilt liquids;
● expansion valve in the water system and valve on
the boiler to avoid overpressure;
● nonreturn valve on the water system to avoid
backflow to the main water supply.
3. TECHNICAL DATA
3.1. Dimensions and weights (Fig.4)
A mm
A1* mm
B mm
C mm
D mm
H mm
H1** mm
Boiler capacity in litres
Machine weight kg
Water inlet
Ømm drainage
Packaging
Volume m
3
Dimensions L x P x H mm
Gross weight kg
* A1(reduced overall dimensions with side case assembly)
**H1 (version lever)
You'll find all the technical data on electric
connection, on the machine identification
label Fig. 1.
Machines provided with gas heating have a standard
connection kit to carry out the following connections
with:
- direct stiff pipe;
- copper and double cone pipe;
- rubber support.
Gas connections must be made in accor-
dance with all local, state and federal safety
regulations.
All manuals and user guides at all-guides.com
2 GR.
1 GROUP
COMPACT
60
60
50
50
505
505
500
500
300
300
40
40
850
-
5
5
53
55
3/8"
3/8"
14
14
0.28
0.28
60x650x605
60x650x605
63
65
2.4. Electric safety devices
The safety devices provided are:
● 12V low tension push buttons an the E control key
panel;
● thermal protection on the pump motor;
● gas failure thermocouple and thermocouple ther-
mostat automatically closing gas tap;
● safe resistance thermal;
● Electronic safety devices.
2.5. Operating noise
Noise level in the working place does not usually
exceed 0dB(A).
2.6. Vibrations
The machine is supplied with rubber vibration dam-
ping feet. In normal working conditions, the machine
does not produce vibrations harmful to the operator
and the environment.
2 GROUPS
3 GROUPS
850
100
30
0
665
05
500
500
300
300
40
40
850
850
11
16
6
4
3/8"
3/8"
14
14
0.35
0,45
880x650x605
1120x650x605 1360x650x605
6
0
4. USE
The machine have been designed, manufactured and
protected to be used to make express coffee and hot
beverages (tea, cappuccino, etc.). Any other use is to
be considered unsuitable and therefore dangerous.
The manufacturer cannot be held respon-
sible for any damage caused to people
or things due to unsuitable, improper or
irrational use of the machine.
4 GROUPS
1330
1210
1145
500
300
40
850
22
112
3/8"
14
0,54
108
5